- Diesel powered
- Shred branches and trees up to 10cm diameter
- 360° Discharge
- Chips can be used for fuel
- Easy to use
Remet Diesel Powered Disc Chipper
Extra details about the Remet Diesel Powered Disc Chipper
The RTS-630 disc chipper, has been designed for shredding branches and trunks, with a diameter of up to 10 cm, and other wooden materials for example lumber-mill chips.
The thickness of the chips can be adjusted by four replaceable blades (made of HRDOX 500 steel). This is done by adjusting their position against the counter-blade. The blades are fixed to a cutting disk with a diameter of 620 mm.
Most importantly the discharge stack can be rotated by 360˚, this allows you to discharge the stream of chips in any direction. The chipper is characterised by high capacity and high comfort of operation. The chips can be used as a fuel (useful for screw feeders) or compost or as a priming for shrubs.
The chipper is driven by an induction four-stroke internal combustion engine with a capacity of 15 hp. The drive is transmitted through a belt transmission. The chipper is equipped with a safety switch located next to the hopper. Lubrication of the rolling bearings is carried out through the callipers in the bearing housing.
|Parameters of the LIFAN combustion engine||13 HP, four-stroke, OHV|
|Number of cutters on the cutting disk||4 +1 counter-edge / counter|
|Fuel tank capacity||3.8 l (E95)|
|Fuel consumption||2.1-3.3 l/h|
|Max. cutting diameter of branches||dry hard wood 60 mm
fresh hard wood 80 mm
fresh soft wood 100 mm
|Size of chips||20-50 mm|
|Maximum efficiency||6 m3/h|
|Cutting disk diameter||620 mm|
|Manufacturing of cutters||HARDOX steel type 500|
|Thickness of cutters||10 mm|
|Angle of rotation of the outlet pipe||360˚|
|Hopper (dimensions)||480/480 mm|
|Recommended chassis||Off-road with a drawbar|
|Height of the ejection tube||160 cm|
|Dimensions of the chipper with folded hopper long (LxWxH)||85/85/150 cm|
|Emergency protection||Mushroom button|